Auxplasmatic Belt Conveyor Rubber Conveyor Belt Feeder Machine SPECIFICATION: Model TBC-400 TBC-500 TBC-700 TBC-1200 Motor(KW) 1.5 1.5 2.2 2.2 Length(CM) 400 500 700 1200 Width(CM) 80 80 80 80

plastic mixer with drying function

Auxplasmatic Dosing Unit Dose of Colors Plastic Color Mixer Machine SINGLE COLOR UNIT   FEATURES: 1. Unit is comprised of standard modules for ease cleaning and disassembly; 2. Dosing screws are chrome plated for durability; 3. Three-tube hopper magnet is equipped at the base of single color doser to absorb metal impurities so to prevent screw of moulding machine from damage; 4. Main material hopper is optional; 5. External signals can be directly interfaced with control box; 6. The current operation mode can be recorded, unaffected by power failure so operation would be returned to normal when power is on; 7. 50 units of parameter recipes are available for permanently recording the period of material discharging and finished products weight; 8. Both master blockage and overload can be detected, then machine will halt and sound alarm; 9. Use brushless DC motor and free from maintenance.   SPECIFICATION: MODEL CVD-12 CVD-14 CVD-16 CVD-30 CVD-50 SCREW EXTERNAL DIA(MM) 12 14 16 30 50 OUTPUT CAPACITY(KGS/H) 0.1-20 0.2-40 0.5-64 0.8-115 50-200 STORATE HOPPER(L) 15 70 POWER(KW) 0.12KW,1Φ230/50HZ 60HZ WEIGHT(KGS) 23 24 25 28 30  

Working video : youtube Auxplasmatic MACHINERY  Plastic PVC pipes crusher factory, PVC tube crushing machine China factory   Application: This crusher is suitable for crushing all kinds of waste plastic films and bags,such as copper wire PP/PE,HDPE,LDPE,LLDPE woven bag and etc.   Special Features: 1.With unique"V-type" designed blade base,blades material can be customized according  to customer requirements. 2.Easy to operate and simple in replacement of cutter blades. 3.Cutter blades are resistant to wear and tear. 4.Removable screen mesh is easy to install or disassemble for cleaning and changing colors. 5.Motor with overload protection device. 6.Using electrical control security design to ensure the safety of your personnels. 7.Standard voltage is 380V 50Hz 3Phase.(Can be customized according to customers’request)  8.Good adaptability and long service life. 9.Noise reduction insulation for machine body or outside sound insulation roon is available by optional order. 10.10HP-100HP optional.(Can be customized according to customers’request)   

Plastic Crusher Granulator with Washing Function      FEATURES: 1. SuitS for recycling big plastic bottles, containers, film, woven bags. It's used work in PET bottle recycling line or PP/PE film recycling line; 2. Over-load emergency switch; 3. Low energy consumption and low noise.   SPECIFICATION: Model Crushing Chamber (mm) Seive Dia. (mm) Capacity (kg/h) Flexible Blades (pcs) Fixed Blades (pcs)  Power  (kw) Dimension (mm) PC800W 800*560 20 400-600 8 4 30 190*180*340 PC1000W 1000*560 20 800-1000 8 4 55 200*200*300 PC1000W 1000*560 20 800-1000 8 4 75 200*200*300 PC1200W 1200*560 20 1000-1200 12 6 75 210*200*300  

 Air Handling Unit for Room Air Cooling

hopper dryer GHD-U series offter an feeective and low-cost method for plastic material drying, adopts hot air down-blowing and insulated design, to avoid contamination, it is also ideally for use with dehumidifiers to dry engineering plastics. Mould dryer to prevent moisture condensation on the mould surface. Main Applications: - fast moulding cycles for closures - preforms moulding - thin wall containers, pails, etc. - blow moulding - further applications of fast moulding Mould Dryer provide is the  optimal  solution to improve productivity, reduce scraps and granting long life to the mould. Available 8 models up to 3600 m3/h MD -  outlet dew point down to -10°C -  dehumidification system based on solid adsorbing dessicants, using a rotor made  of   active  metal  silicates -  air flow from 280 to 3600 m3/h Options : -  air ducts -  hood for injection or blow moulding machine -  absolute filter

Single Shaft Shredder Waste Plastic Shredding Recycling Machine For Paper shredder wooden shredder food shredder book shredder pipe shredder film shredder   

honeycomb dehumidifiers are mainly used to dry hygroscopic engineering  plastics. A honeycomb-rotor is used to offer effective drying, which under ideal conditions, can supply dehumidified dry air with a dew-point lower than -40℃.This series comprises 15 models of honeycomb dehumidifiers, the largest of which can provide dry air up to a quantity of 4,000 m3/hr. Mould dryer to prevent moisture condensation on the mould surface. Main Applications: - fast moulding cycles for closures - preforms moulding - thin wall containers, pails, etc. - blow moulding - further applications of fast moulding Mould Dryer provide is the  optimal  solution to improve productivity, reduce scraps and granting long life to the mould. Available 8 models up to 3600 m3/h MD -  outlet dew point down to -10°C -  dehumidification system based on solid adsorbing dessicants, using a rotor made  of   active  metal  silicates -  air flow from 280 to 3600 m3/h Options : -  air ducts -  hood for injection or blow moulding machine -  absolute filter

Plastic injection machine drying machine,extruding machine Nelone PET dehumidifier is to dry PP PE PET granules and pellets . Use with hopper dryer and auto loader together and create a neat and clean molding environment by placing them away from injection machine. Dehumidifiers Mould dryer are suitable to prevent moisture condensation on the mould surface; dryer reduce scraps and granting long life to the mould in the plastic injection moulding plants. hood forinjection or blow moulding machine