Air Compressors 

Bottle film recycling with washing .

Plastic Crusher Blade flat blade jaw blade pineapple blade  Plastic film agglomerator blade SKD-II 6CRSI material topda    Please offer your blade drawing we can make any blades for you by different materials.

Automatic feeder loader to transfer small pvc pp pe abs granules and pellets

Auxplasmatic Dosing Unit Dose of Colors Plastic Color Mixer Machine DOUBLE COLOR UNIT FEATURES: 1.Unit is comprised of standard modules for ease cleaning and disassembly; 2.Dosing screws are chrome plated for durability; 3.Three-tube hopper magnet is equipped at the base of single color doser to absorb metal impurities so to prevent screw of moulding machine from damage; 4.Main material hopper is optional; 5.External signals can be directly interfaced with control box; 6.The current operation mode can be recorded, unaffected by power failure so operation would be returned to normal when power is on; 7.50 units of parameter recipes are available for permanently recording the period of material discharging and finished products weight; 8.Both master blockage and overload can be detected, then machine will halt and sound alarm; 9.Use brushless DC motor and free from maintenance; 10.Blender is a standard equipment for double color doser to make the material evenly mixed. SPECIFICATION: MODEL CVD-12/12 CVD-14/14 CVD-16/16 CVD-30/30 SCREW EXTERNAL DIA(MM) 12 14 16 30 OUTPUT CAPACITY(KGS/H) (0.1-20)*2 (0.2-40)*2 (0.5-64)*2 (0.8-115)*2 STORATE HOPPER(L) 15*2 POWER(KW) 0.24KW,1Φ230/50HZ 60HZ WEIGHT(KGS) 40 44 48 53

For plastic powder,granules, virgin, regrind & master batch mixing

hopper dryer GHD-U series offter an feeective and low-cost method for plastic material drying, adopts hot air down-blowing and insulated design, to avoid contamination, it is also ideally for use with dehumidifiers to dry engineering plastics. Mould dryer to prevent moisture condensation on the mould surface. Main Applications: - fast moulding cycles for closures - preforms moulding - thin wall containers, pails, etc. - blow moulding - further applications of fast moulding Mould Dryer provide is the  optimal  solution to improve productivity, reduce scraps and granting long life to the mould. Available 8 models up to 3600 m3/h MD -  outlet dew point down to -10°C -  dehumidification system based on solid adsorbing dessicants, using a rotor made  of   active  metal  silicates -  air flow from 280 to 3600 m3/h Options : -  air ducts -  hood for injection or blow moulding machine -  absolute filter

 Air Handling Unit for Room Air Cooling

Single Shaft Shredder Waste Plastic Shredding Recycling Machine For Paper shredder wooden shredder food shredder book shredder pipe shredder film shredder   

Auxplasmatic Dosing Unit Dose of Colors Plastic Color Mixer Machine SINGLE COLOR UNIT   FEATURES: 1. Unit is comprised of standard modules for ease cleaning and disassembly; 2. Dosing screws are chrome plated for durability; 3. Three-tube hopper magnet is equipped at the base of single color doser to absorb metal impurities so to prevent screw of moulding machine from damage; 4. Main material hopper is optional; 5. External signals can be directly interfaced with control box; 6. The current operation mode can be recorded, unaffected by power failure so operation would be returned to normal when power is on; 7. 50 units of parameter recipes are available for permanently recording the period of material discharging and finished products weight; 8. Both master blockage and overload can be detected, then machine will halt and sound alarm; 9. Use brushless DC motor and free from maintenance.   SPECIFICATION: MODEL CVD-12 CVD-14 CVD-16 CVD-30 CVD-50 SCREW EXTERNAL DIA(MM) 12 14 16 30 50 OUTPUT CAPACITY(KGS/H) 0.1-20 0.2-40 0.5-64 0.8-115 50-200 STORATE HOPPER(L) 15 70 POWER(KW) 0.12KW,1Φ230/50HZ 60HZ WEIGHT(KGS) 23 24 25 28 30