Plastic crusher of using and maintenance points, according to the type of plastic crushers and working conditions . In general use plastic crusher be especially careful when the following eight matters.

    1. before starting, should use first human will move driving wheel engages a two laps, confirmed that sports flexible, to the plastic crusher open action, have to wait until after the normal operation of plastic crushers level feeding.

    2. stop plastic crushers before operation, should be first stop feeding and will machine material row net, and then cut off the motor power supply.

    3. in the works to pay attention in the temperature of the bearing, ensure bearing keep good lubrication condition, and pay attention to sound and vibration without exception. Found not normal situation, you should check whether it is not easy to stop is broken objects gets stuck, or plastic crusher is damaged.

    4. to keep the plastic crushers to even feed, prevent overload. Defend metal and wood can't be broken objects fall into the machine. Can't broken, enters the material moisture too much; Wet broken, it needs to maintain proper water, due to the strong water shortage and congestion, reduce the production ability.

    5.check whether the granularity of broken product meets the requirement. If the size of the particle too much more than the required, should find out the reasons (such as screen flaw is too large, discharging mouth wide, hammer wear, etc), and take proper measures to eliminate.

    6. plastic crusher parking, check whether the bolt firm, easy to wear parts of how wear degree. Tooth crusher, it should also use parking opportunity caught in the teeth away between of the wood.

    7. worn parts, should change in time or repair.

8. plastic crusher insurance device, must keep a good state, must not be for save trouble, and make insurance device failure