Auxplasmatic Dosing Unit Dose of Colors Plastic Color Mixer Machine DOUBLE COLOR UNIT FEATURES: 1.Unit is comprised of standard modules for ease cleaning and disassembly; 2.Dosing screws are chrome plated for durability; 3.Three-tube hopper magnet is equipped at the base of single color doser to absorb metal impurities so to prevent screw of moulding machine from damage; 4.Main material hopper is optional; 5.External signals can be directly interfaced with control box; 6.The current operation mode can be recorded, unaffected by power failure so operation would be returned to normal when power is on; 7.50 units of parameter recipes are available for permanently recording the period of material discharging and finished products weight; 8.Both master blockage and overload can be detected, then machine will halt and sound alarm; 9.Use brushless DC motor and free from maintenance; 10.Blender is a standard equipment for double color doser to make the material evenly mixed. SPECIFICATION: MODEL CVD-12/12 CVD-14/14 CVD-16/16 CVD-30/30 SCREW EXTERNAL DIA(MM) 12 14 16 30 OUTPUT CAPACITY(KGS/H) (0.1-20)*2 (0.2-40)*2 (0.5-64)*2 (0.8-115)*2 STORATE HOPPER(L) 15*2 POWER(KW) 0.24KW,1Φ230/50HZ 60HZ WEIGHT(KGS) 40 44 48 53

Plastic injection machine drying machine,extruding machine Nelone PET dehumidifier is to dry PP PE PET granules and pellets . Use with hopper dryer and auto loader together and create a neat and clean molding environment by placing them away from injection machine. Dehumidifiers Mould dryer are suitable to prevent moisture condensation on the mould surface; dryer reduce scraps and granting long life to the mould in the plastic injection moulding plants. hood forinjection or blow moulding machine

For plastic powder,granules, virgin, regrind & master batch mixing

3 in 1 dehumidifier drying Series compact dryer gathers dehumidification,  drying and two-stage conveying three functions, is very suitable for drying engineering plastics materials with hygroscopicity such as PA, PC, PBT, PET,etc. Of them is Optics GCD could be used in processing application of lens, LCD backlight board and discs, it has dew-point of below -40℃ under ideal condition. Mould dryer to prevent moisture condensation on the mould surface. Main Applications: - fast moulding cycles for closures - preforms moulding - thin wall containers, pails, etc. - blow moulding - further applications of fast moulding Mould Dryer provide is the  optimal  solution to improve productivity, reduce scraps and granting long life to the mould. Available 8 models up to 3600 m3/h MD -  outlet dew point down to -10°C -  dehumidification system based on solid adsorbing dessicants, using a rotor made  of   active  metal  silicates -  air flow from 280 to 3600 m3/h Options : -  air ducts -  hood for injection or blow moulding machine -  absolute filter

hopper dryer GHD-U series offter an feeective and low-cost method for plastic material drying, adopts hot air down-blowing and insulated design, to avoid contamination, it is also ideally for use with dehumidifiers to dry engineering plastics. Mould dryer to prevent moisture condensation on the mould surface. Main Applications: - fast moulding cycles for closures - preforms moulding - thin wall containers, pails, etc. - blow moulding - further applications of fast moulding Mould Dryer provide is the  optimal  solution to improve productivity, reduce scraps and granting long life to the mould. Available 8 models up to 3600 m3/h MD -  outlet dew point down to -10°C -  dehumidification system based on solid adsorbing dessicants, using a rotor made  of   active  metal  silicates -  air flow from 280 to 3600 m3/h Options : -  air ducts -  hood for injection or blow moulding machine -  absolute filter

Dosing Unit For plastic material Mixing 

Plastic molding cooling, Milk cooling ,air cooling for large indoor spcae, food cooling, priting cooling

Auxplasmatic Round Cooling Tower, from 10ton to 1000ton, close flow type, FRP tower body

Plastic molding small chiller ,Air conditioning, food cooling, priting cooling,milk cooling milk chiller 

Plastic Crusher Granulator with Washing Function      FEATURES: 1. SuitS for recycling big plastic bottles, containers, film, woven bags. It's used work in PET bottle recycling line or PP/PE film recycling line; 2. Over-load emergency switch; 3. Low energy consumption and low noise.   SPECIFICATION: Model Crushing Chamber (mm) Seive Dia. (mm) Capacity (kg/h) Flexible Blades (pcs) Fixed Blades (pcs)  Power  (kw) Dimension (mm) PC800W 800*560 20 400-600 8 4 30 190*180*340 PC1000W 1000*560 20 800-1000 8 4 55 200*200*300 PC1000W 1000*560 20 800-1000 8 4 75 200*200*300 PC1200W 1200*560 20 1000-1200 12 6 75 210*200*300